EXAM-MASTER – (SP_Feb23v8_Eng_Th_A) – SPIROMETRISTS – THEORY EXAM Copy

Spirometry is a type of pulmonary function test that measures the:

Quality assurance in spirometry refers to procedures in place in the environment, equipment, technician and employee before, during and after spirometry testing to reduce variability in spirometry measurements:

When testing is complete the bacterial filter must be removed and discarded by:

Routine maintenance of spirometry equipment should take place:

Keeping the employee safe when conducting spirometry is the responsibility of the:

In the Occupational Health setting, spirometry records need to be kept for:

Fill in the blank:

The goal of a good quality assured spirometry programme is to ensure that at least ______ percent of spirometry tests are technically valid:

Infection control procedures for spirometry must be:

Quality control in spirometry refers to:

A volume calibration check is valid if the percentage deviation between the syringe volume and measured volume, regardless of the flow rates is:

Linearity testing in spirometry refers to:

A volume calibration is valid when you use a 3L syringe and the FVC and FIVC falls between:

Choose the option that does not fit: There are four ways the technician can check if the calibration syringe is in good working order is:

How often should a linearity calibration check be done:

Biological quality control is the process of conducting a spirometry test as a control on:

The process of characterisation refers to which of the following:

Monitoring the ambient conditions in spirometry and applying correction factors is important because:

Recommended ambient conditions for spirometer use are:

Test results that are not technically perfect should not be used for interpretation

Reference values are predicted values based on all except one of the options below.
Which is the incorrect option?

Men and women of the same age have differing lung volumes and airflow rates:

Best practice would be to interpret spirometric tests based on the LLN and Z-score rather than percentage of predicted?

Using the image below name the graph on the left:

Using the image below – what type of graph is shown in the right graph?

Using the image below – what is this employee’s approximate predicted FVC:

Using the image below – what is this employee’s approximate predicted FEV₁:

Using the image below – what is this employee’s approximate peak expiratory flow rate (PEFR):]

Using the image below – how long did this worker blow out for on Trial 2

Persons who grow relatively tall also have relatively large lungs when compared to those who are shorter in stature:

For a Non-Caucasian subjects in Africa the following reference values should be selected:

The Forced Vital Capacity (FVC) is

Using this image of numerical results the FEV₁/FVC (actual) result you will use for interpretation of this result is:

The FEF_25-75 is an indication of:

The recommended correct posture for testing is:

The best test (value) is a new test created by the software taking the highest FVC and the
highest FEV₁ from any acceptable trial:

Eleven blows are considered a practical upper limit for most employees:

Usability is:

All the options below are acceptability criteria except one.

Indicate which one is not an acceptability criteria:

Repeatability criteria is when there is:

A minimum of 3 blows and a maximum of 8 blows can be performed in occupational
screening spirometry:

Which of the following descriptions is a test quality grade A

Which is the most correct statement. The best trial is:

The validity of data in spirometry is about:

The 3 key measurements used for interpretation are:

People with obstructive lung disease have:

People with restrictive lung disease:

These numerical Z-score results are indicative of what spirometry result:
FVC = -2.96 FEV₁ = -2.44 FEV₁/FVC = +1.86

These numerical Z-score results are indicative of what spirometry result:
FVC = +1.78 FEV1 = +1.68 FEV1/FVC = +2.00

These numerical Z-score results are indicative of what spirometry result:
FVC = -1.87 FEV1 = -2.04 FEV1/FVC = -1.96

The most common cause for restrictive impairments are which of the following:

An obstructive impairment is evident from which two of the following parameters?

A restrictive impairment is evident from which two of the following parameters?

A reduced FVC with a normal or elevated FEV1/FVC ratio is an indication of restriction:

Impaired lung functions are generally graded in Occupational Health to quantify respiratory impairment/ disability for medico-legal purposes, and to optimise and standardise treatment:

Are the following washout times of activities prior to testing true or false?
Activity: Smoking and/or vaping and/or water pipe use
Timeframe: 2 hours

Are the following washout times of activities prior to testing true or false?
Activity: Consuming intoxicants
Timeframe: 8 hours

Are the following washout times of activities prior to testing true or false?
Activity: Performing vigorous exercise
Timeframe: 15 minutes

Are the following washout times of activities prior to testing true or false?
Activity: Long acting bronchodilators
Timeframe: 6 hours

Are the following washout times of activities prior to testing true or false?
Activity: Short acting bronchodilators
Timeframe: 4 hours

Blowing induced bronchoconstriction in spirometry is:

Bronchodilator responsiveness testing is done to assess the relaxation of bronchial muscle to determine evidence of reversible airflow limitation:

A positive bronchodilator responsiveness test is a FEV1 or FVC change before and
after a bronchodilator test of >=12% and 200mls:

Spirometry equipment maintenance includes:

The subject must hold his/her breath for 30 seconds before exhaling when administering the medication via a spacer:

When giving the medication 4 puffs of 100ug is administered. The technician should
wait at least 10 seconds between the doses being administered:

After administering 400ug of bronchodilator medication, the technician should wait a minimum of 15 minutes for the medication to take effect before repeating the spirometry:

The following results indicate a positive bronchodilator responsiveness test:
Pre FEV1 1.26L, Post FEV1 1.41L / percentage change is 14%

The following results indicate a negative reversibility test:
Pre FEV1L 0.43, Post 0.49L / percentage change is 10%

Premature termination of a blow will lead to:

Glottic closure in spirometry is:

How should height be measured:                                                 

A valid test in spirometry consists of:

Test quality grade refers to:

In blowing induced bronchoconstriction there is:

If an employee displays blowing induced bronchodilation the technician should ask the employee to continue blowing until bronchodilation stabilises:

When grading the quality of the test session the pre and post bronchodilator test results are determined together

The lower level of normal (LLN) for all measurements of spirometry when using Z-Scores is:

The lower level of normal (LLN) for both the FVC and FEV1 when interpreting using percentage of predicted (%pred) is:

The numerical value of the BEV correlates to which part of the blow:

The numerical value of the FET correlates to which part of the blow:

Using the spirogram below please answer:

The BEV in trial 2 is:

Using the spirogram below please answer:

The PEFT in trial 2 is:

Using the spirogram below please answer:

How many acceptable trials are there?

Using the spirogram below please answer:

Is this test repeatable?

Using the spirogram below please answer

The quality grade of this test is:

Using the spirogram below please answer

Which is the best blow:

Using the spirogram below please answer

Would you describe the FIVC in Trial 2 as:

Using the spirogram below please answer:

Would you interpret this test as:

Looking at the pictogram below what is your interpretation of the test result?

Using the Spirograph and the Interpretation Grading table below:

What is your interpretation grading of this test:

Using the spirogram below please answer

True or False :

An ethnic correction was made to the predicted values:

Using the spirogram below please answer

These results are reported at:

Using the spirogram below please answer

The BEVs and PEFTs on the pre and post bronchodilator results are:

Using the spirogram below please answer

The assessment of the acceptability of the pre and post bronchodilator blows on this report show:

Using the spirogram below please answer

The assessment of the repeatability of the pre and post bronchodilator blows on this report show:

Using the spirogram below please answer

The FEV₁ lower level of normal (LLN) on this spirometry result is?

Using the spirogram below please answer

The FEV1/FVC absolute percentage on the post bronchodilator test on this report is?

Using the spirogram below please answer

Using LLN and Z-scores, the post-test test result can be interpreted as:

Using the Spirograph and the Interpretation Grading table below: 

Using the LLN and Z-score the pre bronchodilator spirometry test result can be grade as a:

Using the Spirograph and the Interpretation Grading table below:

Using the LLN and Z-score the post bronchodilator spirometry test result can be grade as a: